v9.0.0 (2025-02-06)

• Adapt to mirage-crypto-rng 1.2.0 API (#526 @hannesm)
• Use dune variants instead of functors for TIME, MCLOCK, PCLOCK -- now using mirage-sleep and mirage-mtime (#526 @hannesm)

v8.2.0 (2024-08-22)

• Use mirage-crypto.1.0 & randomconv.0.2 (@hannesm, #521)
• Update unikernels to mirage.4.6.0 (@hannesm, @reynir, @smorimoto, #522)
• Update our CI system (@samoht, @smorimoto, #519, #520)

v8.1.0 (2024-05-29)

• adapt to mirage-vnetif 0.6.2 changes (#517 @hannesm)
• Add type prefix = Ipaddr.Prefix.t and IP.configured_ips : t -> prefix to the IP layers (#516 @hannesm)
• Mark get_ips as deprecated, use configured_ips instead (#516 @hannesm)

v8.0.2 (2024-05-08)

• remove mirage-random-test dependency (#514 @hannesm)
• remove calls to mirage-profile in tests, now support mirage-vnetif 0.6.1 (#514 @hannesm)

v8.0.1 (2024-03-26)

• TCP: add src : flow -> ipaddr * int, implemented by getsockname on unix (#511 @hannesm)
• TCP unix stack: increase TCP buffer size (was 4096, is now 65536) (#510 @edwintorok)
• TCP: adapt to mirage-flow 4.0: add val shutdown : flow -> [ `read | `write | `read_write ] -> unit Lwt.t (#512 @hannesm, review by @djs55)

v8.0.0 (2023-03-17)

• TCP: add ID for PCB for connection tracking (#495 @TheLortex)
• Unix stack, UDP: copy buffer before passing it to client (#502 @reynir)
• API renamings (due to ppx_cstruct removal): accessors such as Icmpv4_wire.get_icmpv4_ty are now Icmpv4_wire.get_ty ("_icmpv4" is removed) (#505)
• API change: remove deprecated V4-only and V6-only stack The module types Stack.V4 and Stack.V6 no longer exist The bindings Stack.V4V6.listen_udp and listen_tcp have been removed (#494 @hannesm)
• Use Cstruct.to_string instead of deprecated Cstruct.copy (#506 @hannesm)
• Remove ppx_cstruct dependency (#505 @hannesm)
• Remove mirage-profile dependency (#504 @hannesm)
• Remove Mirage3 cross-compilation runes (#507 @hannesm)
• opam: add lower bounds for cmdliner and alcotest (#506 @hannesm)

v7.1.2 (2022-07-27)

• TCP: fix memory leaks on connection close in three scenarios (#489 @TheLortex)

  • simultanous close: set up the timewait timer in the Closing(1) - Recv_ack(2) -> Time_wait state transition
  • client sends a RST instead of a FIN: enable sending a challenge ACK even when the reception thread is stopped
  • client doesn't ACK server's FIN: enable the retransmit timer in the Closing(_) state

v7.1.1 (2022-05-24)

• Ndpv6: demote more logs to debug level (#480 @reynir)
• Ndpv6: set RS opt header (#482 @reynir)
• Icmpv6: add redirect parsing (#481 @reynir)
• Improve log messages of connect and disconnect of various layers and stacks: separate IP addresses with ", " (#485 @hannesm)
• TCP log sources: prefix "tcp" to distinguish them (#484 @reynir)

v7.1.0 (2022-03-23)

• Work with MSVC compiler (@jonahbeckford, #476)
• Skip Lwt_bytes UDP tests on Windows (@MisterDA, #469)
• Run PKG_CONFIG_PATH through cypath (@MisterDA, #469)
• Add Windows CI via GitHub Action (@MisterDA, #469)
• Remove which command and replace it by command -v (@hannesm, #472)
• Fix some typos (@MisterDA, #471)
• Update binaries to cmdliner.1.1.0 (@dinosaure, #475)
• Be able to extract via functor/functoria the TCP/IP stack (@dinosaure, #474)
• Remove missing deprecated usage of Cstruct.len (@dinosaure, #477)

v7.0.1 (2021-12-17)

• Fix cancellation of Unix socket when we don't use Stack.connect (@dinosaure, @hannesm, #466)

v7.0.0 (2021-12-10)

• Fix memory leak in processing RST packets (#460 @balrajsingh, reported in #456 by @dinosaure)
• Move module types (IP, UDP, TCP, STACK, ICMP) into tcpip core library (#463 @hannesm)
• API breakage: Tcpip_checksum is now part of tcpip.checksum (used to be part of tcpip #463 @hannesm)
• API breakage: tcpip.unix has been removed (#463 @hannesm)
• Use Lwt.pause instead of deprecated Lwt_{unix,main}.yield (#461 @dinosaure)

v6.4.0 (2021-11-11)

• Adapt to mirage-protocols 6.0.0 API (#457 @hannesm)
• TCP and UDP now have a listen and unlisten function (fixes #452)
• type ipinput (in TCP and UDP) and listener (in TCP) have been removed

v6.3.0 (2021-10-25)

• Use Cstruct.length instead of deprecated Cstruct.len (#454 @hannesm)
• Avoid deprecated Fmt functions (#455 @hannesm)
• Remove rresult dependency (#455 @hannesm)
• Require OCaml 4.08
• Record TCP statistics via metrics library (#455 @hannesm)

v6.2.0 (2021-07-19)

• This allows to listen on the same port as sending via UDP in the dual socket stack, and avoids file descriptor leaks in the socket stack.
• Socket stack: avoid file descriptor leaks (remember opened file descriptors in data structure, close them in disconnect) (#449 @reynir @hannesm, fixes #446 #450)
• Socket stack: convert an incoming packet on a dual socket to v4 source IP if received via IPv4 (#451 @reynir @hannesm)
• Allow freestanding compilation without opam (#447 @sternenseemann)
• Adapt to alcotest 1.4.0 breaking change (#448 @CraigFE)

v6.1.0 (2021-03-17)

• checksum stubs: Drop caml_ from their name (@hannesm, #445)
• Add cancellation on tcpip.stack-socket (@dinosaure, @talex5, @hannesm, #443)
• Ensure that listen really binds the given socket before creating a task on tcpip.stack-socket (@dinosaure, @hannesm, #439)
• Add ppx_cstruct as a dependency (@hannesm, @dinosaure, #439)
• Upgrade to ocamlformat.0.17.0 (@dinosaure, #442)
• Drop the support of OCaml 4.08.0 (@dinosaure, #442)
• Use the usual layout to compile freestanding C stubs and link them to a Solo5 unikernel (@dinosaure, @hannesm, #441) breaking changes C stubs are prepended by mirage_. Symbols such as checksum's symbols are caml_mirage_tcpip_* instead of caml_tcpip_* tcpip.unix is a fake sub-package and user does not it anymore, he can safely remove it from its project.
• Conflict with < ocaml-freestanding.0.4.1 (@hannesm, #441)

v6.0.0 (2020-11-30)

• Dual IPv4 and IPv6 socket and direct stack support, now requires mirage-stack 2.2.0 and mirage-protocols 5.0.0 (#433 @hannesm)
• The above change also unified arguments passed to connect functions which are API-breaking changes
• IPv6 waits for timeout after sending neighbour advertisement (for duplicate address detection)
• Remove Xen cross-compilation runes, with mirage-xen 6.0.0 they're provided by mirage-xen (#434 @hannesm)
• Move to dune 2.7.0 (and bisect instrumentation if desired) (#436 @hannesm)

v5.0.1 (2020-09-22)

• Assorted IPv6 improvements (#428 #431 #432 @MagnusS @hannesm)

  • set length in packets to be sent
  • preserve updated ctx from Ndv6.handle
  • fix ICMP checksum computation
  • implement Mirage_stack.V6 signature
  • add connect, mtu, iperf tests
  • fix DAD protocol implementation (and test it)
  • avoid out of bounds accesses of IPv6 packets (check length before accessing)
• Fix 32 bit issues (@MagnusS)
• Implement stack-direct and tcp disconnect: tear down existing connections (#429 @hannesm)
• Treat broadcast address of network as broadcast as well (#430 @hannesm, reported in #427)

v5.0.0 (2020-06-19)

• Static_ipv4.connect API change: takes a cidr:Ipaddr.V4.Prefix.t instead of ip:Ipaddr.V4.t and network:Ipaddr.V4.Prefix.t (#426 @hannesm)
• Adapt to ipaddr 5.0.0 API changes (#426 @hannesm)

v4.1.0 (2020-02-08)

• Revert "Ipv4.Fragments use a Lru.M.t instead of Lru.F.t" (#423 by @hannesm) A Lru.M.t allocates a Hashtbl.t of size = capacity (= 256 * 1024 in our case), this leads to excessive ~2MB memory consumption for each Fragment cache, reported by @xaki23 in mirage/qubes-mirage-firewall#93
• use SOCK_RAW for an ICMP socket in the unix sockets API (previously used SOCK_DGRAM which did not work) reported by @justinc1 in #358, fixed in #424 by @hannesm
• tcp is now compatible with lwt >= 5.0.0 (where Lwt.async requires a function of (unit -> unit Lwt.t) (#370 #425 @cfcs @hannesm, issue #392 @emillon)
• Add a dependency on dune-configurator to support dune 2.0.0 (#421 @avsm)

v4.0.0 (2019-11-01)

• Adapt to mirage-protocols 4.0.0, mirage-net 3.0.0, mirage-time 2.0.0, mirage-clock 3.0.0, mirage-stack 2.0.0 interface changes (#420 @hannesm)
• Revise Static_ipv4.connect signature (for more safety): val connect : ip:(Ipaddr.V4.Prefix.t * Ipaddr.V4.t) -> ?gateway:Ipaddr.V4.t -> ?fragment_cache_size:int -> E.t -> A.t -> t Lwt.t it used to be: val connect : ?ip:Ipaddr.V4.t -> ?network:Ipaddr.V4.Prefix.t -> ?gateway:Ipaddr.V4.t option -> C.t -> E.t -> A.t -> t Lwt.t The clock C.t is gone (due to mirage-clock 3.0.0), ~ip and ~network are now required and passed as pair ~ip. The optional argument ?gateway is of type Ipaddr.V4.t. The new optional labeled argument ~fragment_cache_size specifies the byte size of the IPv4 fragment cache (#420 @hannesm)

v3.7.9 (2019-10-15)

• Add ?ttl:int parameter to Udp and Icmp write (#416 @phaer)
• Ipv4.Fragments use a Lru.M.t instead of Lru.F.t (#418 @hannesm)

• Adapt to mirage-protocols 3.1.0 changes (#419 @hannesm)

  • removed IP.set_ip
  • added `Would_fragment to Ip.error

v3.7.8 (2019-08-12)

• provide Fragments.fragment for the write side of fragmentation, use in Static_ipv4 (#415, @hannesm)

v3.7.7 (2019-07-16)

• support ipaddr/macaddr.4.0.0 interfaces (@avsm)
• remove extraneous debug messages from Ipv4.Fragments (@hannesm, #410)

v3.7.6 (2019-07-08)

• opam: ensure Xen bindings are built with right mirage-xen-ocaml CFLAGS (@avsm)
• opam: correctly register mirage-xen-ocaml as a depopt (@avsm)
• use mirage-protocols-3.0 interface for ipaddr printing (#408 @yomimono @linse)
• remove dependency on configurator and use dune's builtin one instead (@avsm)

v3.7.5 (2019-05-03)

• drop IPv4 packets which destination address is not us or broadcast (#407 by @hannesm)

v3.7.4 (2019-04-11)

• ipv4 reassembly requires lru 0.3.0 now (#406 by @hannesm)
• ICMP test maintenance (#405 by @yomimono @linse)
• remove usage of Cstruct.set_len (use Cstruct.sub with offset 0 instead) (#403 by @hannesm)

v3.7.3 (2019-04-06)

• fix ICMPv4 checksum calculation (#401 by @yomimono)

v3.7.2 (2019-03-29)

• add Ipv4_packet.Unmarshal.header_of_cstruct (#397 by @linse)
• require cstruct version 3.2.0 (#398 by @hannesm)

v3.7.1 (2019-02-25)

• Adjust to mirage-protocols 2.0.0 changes (#394 by @hannesm)
• Ethif is now Ethernet (#394 by @hannesm)
• IPv4 write now fragments if payload exceeds MTU (and the optional labeled fragment argument is not false) (#394 by @hannesm)

v3.7.0 (2019-02-02)

• Use Lwt_dllist instead of Lwt_sequence, due to the latter being deprecated upstream in Lwt (ocsigen/lwt#361) (#388 by @avsm).
• Remove arpv4 and ethif sublibraries, now provided by ethernet and arp-mirage opam packages (#380 by @hannesm).
• Upgrade from jbuilder to dune (#391 @avsm)
• Switch from topkg to dune-release (#391 @avsm)

v3.6.0 (2019-01-04)

• The IPv4 implementation now supports reassembly of IPv4 fragments (#375 by @hannesm)

  • using a LRU cache using up to 256KB memory
  • out of order fragments are supported
  • maximum number of fragments is 16
  • timeout between first and last fragment is 10s
  • overlapping fragments are dropped
• IPv6: use correct timeout value after first NS message (#334 @djs55)
• Use Ipaddr.pp instead of Ipaddr.pp_hum due to upstream interface changes (#385 @hannesm).

v3.5.1 (2018-11-16)

• socket stack (tcp/udp): catch exception in recv_from and accept (#376 @hannesm)
• use mirage-random-test for testing (Stdlibrandom got removed from mirage-random>1.2.0, #377 @hannesm)

v3.5.0 (2018-09-16)

• Ipv4: require Mirage_random.C, used for generating IPv4 identifier instead of using OCaml's stdlib Random directly (#371 @hannesm)
• Tcp: use entire 32 bits at random for the initial sequence number, thanks to Spencer Michaels and Jeff Dileo of NCC Group for reporting (#371 @hannesm)
• adjust to mirage-protocols 1.4.0 and mirage-stack 1.3.0 changes (#371 @hannesm) Arp no longer contains the type alias ethif Ethif no longer contains the type alias netif Static_ipv4 no longer contains the type alias ethif and prefix Ipv6 no longer contains the type alias ethif and prefix Mirage_protocols_lwt.IPV4 no longer contains the type alias ethif Mirage_protocols_lwt.UDPV4 and TCPV4 no longer contain the type alias ip
• remove unused types: 'a config, netif, and id from socket and direct stack (#371 @hannesm)
• remove usage of Result, depending on OCaml >= 4.03.0 (#372 @hannesm)

v3.4.2 (2018-06-15)

Note the use of the new TCP keep-alive feature can cause excessive amounts of memory to be used in some circumstances, see https://github.com/mirage/mirage-tcpip/issues/367

• Ensure a zero UDP checksum is sent as 0xffff, not 0x0000 (#359 @stedolan)
• Avoid leaking a file descriptor in the socket stack if the connection fails (#363 @hannesm)
• Avoid raising an exception with Lwt.fail when write fails in the socket stack (#363 @hannesm)
• Ignore EBADF errors in close in the socket stack (#366 @hannesm)
• Emit a warning when TCP keep-alives are used (#368 @djs55)

v3.4.1 (2018-03-09)

• expose tcp_socket_options in the socket stack, fixing downstream builds (#356 @yomimono)
• add missing dependencies and constraints (#354 @yomimono, #353 @rgrinberg)
• remove leftover ocamlbuild files (#353 @rgrinberg)

v3.4.0 (2018-02-15)

• Add support for TCP keepalives (#338 @djs55)
• Fix TCP deadlock (#343 @mfp)
• Update the CI to test OCaml 4.04, 4.05, 4.06 (#344 @yomimono)

v3.3.1 (2017-11-07)

• Add an example for user-space ping, and some socket ICMPv4 fixes (#336 @djs55)
• Make tcpip safe-string-safe (and buildable by default on OCaml 4.06.0) (#341 @djs55)

v3.3.0 (2017-08-08)

• Test with current mirage-www master (#323 @yomimono)
• Improve the Tcp.Wire API (#325 @samoht)
• Add dependency from stack-unix to io-page-unix (@avsm)
• Replace dependency on cstruct.lwt with cstruct-lwt (#322 @yomimono)
• Update to lwt 3.0 (#326 @samoht)
• Replace oUnit with alcotest (#329 @samoht)
• Fix stub linking on Xen (#332 @djs55)
• Add support for ICMP sockets on Windows (#333 @djs55)

v3.2.0 (2017-06-26)

• port to jbuilder. Build time is now roughly 4-5x faster than the old oasis-based build system.
• packs have been replaced by module aliases.

v3.1.4 (2017-06-12)

• avoid linking to cstruct.ppx in the compiled library and only use it at build time (#316 @djs55)
• use improved packet size support in mirage-vnetif>=0.4.0 to test the MTU fixes in #313.

v3.1.3 (2017-05-23)

• involve the IP layer's MTU in the TCP MSS calculation (hopefully correctly) (#313, by @yomimono)

v3.1.2 (2017-05-14)

• impose a maximum TCP MSS of 1460 to avoid sending over-large datagrams on 1500 MTU links (#309, by @hannesm)

v3.1.1 (2017-05-14)

• fix parsing 20-byte cstructs as ipv4 packets (#307, by @yomimono)
• udp: payload length parse fix (#307, by @yomimono)
• support lwt >= 2.7.0 (#308, by @djs55)

v3.1.0 (2017-03-14)

• implement MTU setting and querying in the Ethernet module (compatibility with mirage-protocols version 1.1.0), and use this value to inform TCP's MSS. (#288, by @djs55)
• rename the ~payload argument of TCP/UDP marshallers to ~payload_len, in an attempt to clarify that the payload will not be copied to the Cstruct.t returned by these functions (#301, by @talex5)
• functorize ipv6 over a random implementation (#298, by @olleolleolle and @hannesm)
• add tests for sending and receiving UDP packets over IPv6 (#300, by @mattgray)
• avoid float in TCP RTO calculations. (#295, by @olleolleolle and @mattgray)
• numerous bugfixes in header marshallers and unmarshallers (#301, by @talex5 and @yomimono)
• replace polymorphic equality in _packet.equals functions (#302, by @yomimono)

v3.0.0 (2017-02-23)

• adapt to MirageOS 3 API changes (many PRs, from @hannesm, @samoht, and @yomimono):

  • replace error polyvars in many functions with result types
  • define and use error types
  • connect in various modules now returns the device directly or raises an exception
  • refer to mirage-protocols and mirage-stacks, rather than mirage-types
• if no UDP source port is given to UDP.write, choose a random one (#272, by @hannesm)
• remove Ipv4.Routing.No_route_to_destination_address exception; treat routing failures as normal packet loss in TCP (#269, by @yomimono)
• Ipv6.connect takes a list of IPs (#268, by @yomimono)
• remove exception "Refused" in TCP (#267, by @yomimono)
• remove DHCP module. Users may be interested in the replacement charrua-core (#260, by @yomimono)
• move Ipv4 to Static_ipv4, which can be used by other IPv4 modules with their own configuration logic (#260, by @yomimono)
• remove mode from STACKV4 record and configuration; Ipv4.connect now requires address parameters and the module exposes no methods for modifying them. (#260, by @yomimono)
• remove unused id types no longer required by mirage-types (#255, by @yomimono)
• overhaul how random is used and handled (#254 and others, by @hannesm)
• fix redundant memset that zeroed out options in Tcp_packet.Marshal.into_cstruct (#250, by @balrajsingh)
• add vnetif backend for triggering fast retransmit in iperf tests (#248, by @magnuss)
• fixes for incorrect timer values (#247, by @balrajsingh)
• add vnetif backend that drops packets with no payload (#246, by @magnuss)
• fix a race when closing test pcap files (#246, by @magnuss)

v2.8.1 (2016-09-12)

• Set the TCP congestion window correctly when going into fast-recovery mode. (#244, by @balrajsingh)
• When TCP packet loss is discovered by timeout, allow transition into fast-recovery mode. (#244, by @balrajsingh)

v2.8.0 (2016-04-04)

• Provide an implementation for the ICMPV4 module type defined in mirage-types 2.8.0. Remove default ICMP handling from the IPv4 module, but preserve it in tcpip-stack-direct. (#195 by @yomimono)
• Explicitly require the use of an OCaml compiler >= 4.02.3 . (#195 by @yomimono)
• Explicitly depend on result. (#195 by @yomimono)

v2.7.0 (2016-03-20)

• Raise Invalid_argument if given an invalid port number in listen_{tcp,udp}v4 (#173 by @matildah and #175 by @hannesm)
• Improve TCP options marshalling/unmarshalling (#174 by @yomimono)
• Add state tests and fixes for closure conditions (#177 #176 by @yomimono)
• Remove bogus warning (#178 by @talex5)
• Clean up IPv6 stack (#179 by @nojb)
• RST checking from RFC5961 (#182 by @ppolv)
• Transform EPIPE exceptions into `Eof (#183 by @djs55)
• Improve error strings in IPv4 (#184 by @yomimono)
• Replace use of cstruct.syntax with cstruct.ppx (#188 by @djs55)
• Make the Unix subpackages optional, so the core builds on Win32 (#191 by @djs55)

v2.6.1 (2015-09-15)

• Add optional arguments for settings in ip v6 and v4 connects (#170, by @Drup)
• Expose Ipv4.Routing.No_route_to_destination_address (#166, by @yomimono)

v2.6.0 (2015-07-29)

• ARP now handles ARP frames, not Ethernet frames with ARP payload (#164, by @hannesm)
• Check length of received ethernet frame to avoid cstruct exceptions (#117, by @hannesm)
• Pull arpv4 module out of ipv4. Also add unit-tests for the newly created ARP library (#155, by @yomimono)

v2.5.1 (2015-07-07)

• Fix regression introduced in 2.5.0 where packet loss could lead to the connection to become very slow (#157, MagnusS, @talex5, @yomimono and @balrajsingh)
• Improve the tests: more logging, more tracing and compile to native code when available, etc (@MagnusS and @talex5)
• Do not raise Invalid_argument("Lwt.wakeup_result") every time a connection is closed. Also now pass the raised exceptions to Lwt.async_exception_hook instead of ignoring them transparently, so the user can decide to shutdown its application if something wrong happens (#153, #156, @yomomino and @talex5)
• The channel library now lives in a separate repository and is released separately (#159, @samoht)

v2.5.0 (2015-06-10)

• The test runs now produce .pcap files (#141, by @MagnusS)
• Strip trailing bytes from network packets (#145, by @talex5)
• Add tests for uniform packet loss (#147, by @MagnusS)
• fixed bug where in case of out of order packets the ack and window were set incorrectly (#140, #146)
• Properly handle RST packets (#107, #148)
• Add a Log module to control at runtime the debug statements which are displayed (#142)
• Writing in a PCB which does not have the right state now returns an error instead of blocking (#150)

v2.4.3 (2015-05-05)

• Fix infinite loop in Channel.read_line when the line does not contain a CRLF sequence (#131)

v2.4.2 (2015-04-29)

• Fix a memory leak in Channel (#119, by @yomimono)
• Add basic unit-test for channels (#119, by @yomimono)
• Add alcotest testing templates
• Modernize Travis CI scripts

v2.4.1 (2015-04-21)

• Merge between 2.4.0 and 2.3.1

v2.4.0 (2015-03-24)

• ARP improvements (#118)

v2.3.1 (2015-03-31)

• Do not raise an assertion if an IP frame has extra trailing bytes (#221).

v2.3.0 (2015-03-09)

• Fix STACKV4 for the DEVICE signature which has connect removed (in Mirage types 2.3+).

v2.2.3 (2015-03-09)

• Add ICMPv6 error reporting functions (#101)
• Add universal IP address converters (#108)
• Add error_message functions for human-readable errors (#98)
• Improve debug logging for ICMP Destination Unreachable packets.
• Filter incoming frames by MAC address to stop sending unnecessary RSTs. (#114)
• Unhook unused modules Sliding_window and Profiler from the build. (#112)
• Add an explicit connect method to the signatures. (#100)

v2.2.2 (2015-01-11)

• Readded tracing and ARP fixes which got accidentally reverted in the IPv6 merge. (#96)

v2.2.1 (2014-12-20)

• Use Bytes instead of String to begin the -safe-string migration in OCaml 4.02.0 (#93).
• Remove dependency on uint to avoid the need for a C stub (#92).

v2.2.0 (2014-12-18)

Add IPv6 support. This changeset minimises interface changes to the existing STACKV4 interfaces to facilitate a progressive merge. The only visible interface changes are:

• IPV4.set_ipv4_* functions have been renamed IPV4.set_ip_* because they are shared between IPV4 and IPV6.
• IPV4.get_ipv4 and get_ipv4_netmask now return a list of Ipaddr.V4.t (again because this is the common semantics with IPV6.)
• Several types that had v4 in their names (like IPV4.ipv4addr) have lost that particle.

v2.1.1 (2014-12-12)

• Improve console printing for the DHCP client to output line breaks properly on Xen consoles.

v2.1.0 (2014-12-07)

• Build Xen stubs separately, with CFLAGS from mirage-xen 2.1.0+. This allows us to use the red zone under x86_64 Unix again.
• Adding tracing labels and counters, which introduces a new dependency on the mirage-profile package.

v2.0.3 (2014-12-05)

• Fixed race waiting for ARP response (#86).
• Move the the code that configures IPv4 address, netmask and gateways after receiving a successful lease out of the Dhcp_clientv4 module and into Stackv4 (#87)

v2.0.2 (2014-12-01)

• Add IPv4 multicast to MAC address mapping in IPv4 output processing (#81 from Luke Dunstan).
• Improve formatting of DHCP console logging, including printing out options (#83).
• Build with -mno-red-zone on x86_64 to avoid stack corruption on Xen (#80).

v2.0.1 (2014-11-04)

• Fixed race condition in the signalling between the rx/tx threads under load.
• Experimentally switch to immediate ACKs in TCPv4 by default instead of delayed ones.

v2.0.0 (2014-11-02)

• Moved 1s complement checksum C code here from mirage-platform.
• Depend on Console_unix and Console_xen instead of Console.
• [socket] Do not return an Eof when writing 0-length buffer (#76).
• [socket] Accept callbacks now run in async threads instead of being serialised (#75).

v1.1.6 (2014-07-20)

• Quieten down the stack logging rate by not announcing IPv6 packet discards.
• Raise exception Bad_option for unparsable or invalid TCPv4 options (#57).
• Fix linking error with module Tcp_checksum by lifting it into top library (#60).
• Add opam file to permit easier local pinning, and fix Travis to use this.

v1.1.5 (2014-06-18)

• Ensure that DHCP completes before the application is started, so that unikernels that establish outgoing connections can do so without a race. (fix from Mindy Preston in #53, followup in #55)
• Add echo, chargen and discard services into the examples/ directory. (from Mindy Preston in #52).

v1.1.4 (2014-06-03)

• [tcp] Fully process the last ACK in a 3-way handshake for server connections. This ensures that a FIN is correctly transmitted upon application-initiated connection close. (fix from Mindy Preston in #51).

v1.1.3 (2014-03-01)

• Expose IPV4 through the STACKV4 interface.

v1.1.2 (2014-03-27)

• Fix DHCP variable length option parsing for MTU responses, which in turns improves robustness on Amazon EC2 (fix from @yomimono via mirage/mirage-tcpip#48)

v1.1.1 (2014-02-21)

• Catch and ignore top-level socket exceptions (#219).
• Set SO_REUSEADDR on listening sockets for Unix (#218).
• Adapt the Stack interfaces to the v1.1.1 mirage-types interface (see mirage/mirage#226 for details).

v1.1.0 (2014-02-03)

• Rewrite of the library as a set of functors that parameterize the stack across the V1_LWT module types from Mirage 1.1.x. This removes the need to compile separate Xen and Unix versions of the stack.

v0.9.5 (2013-12-08)

• Build for either Xen or Unix, depending on the value of the OS envvar.
• Shift to the mirage-types 0.5.0+ interfaces, which breaks the socket backend (temporarily).
• Port the direct stack to the new interfaces.
• Add Travis CI scripts.

v0.9.4 (2013-08-09)

• Use the Ipaddr external library and remove the Homebrew equivalents in Nettypes.

v0.9.3 (2013-07-18)

• Changes in module Manager: Removed some functions from the `.mli (plug/unplug) and added some modifications in the way the Manager interacts with the underlying module Netif. The Netif.create function does not take a callback anymore.

v0.9.2 (2013-07-09)

• Improve TCP state machine for connection teardown.
• Limit fragment number to 8, and coalesce buffers if it goes higher.
• Adapt to mirage-platform-0.9.2 API changes.

v0.9.1 (2013-06-12)

• Depend on mirage-platform-0.9.1 direct tuntap interfaces.
• Version bump to catch up with mirage-platform.

v0.5.2 (2013-02-08)

• Encourage scatter-gather I/O all the time, rather than playing tricks with packet header buffers. This simplifies the output path considerably and cuts minor heap allocations down.
• Install the packed cmx along with the cmxa to ensure that the compiler can do cross-module optimization (this is not a fatal error, but will impact performance if the cmx file is not present).

v0.5.1 (2012-12-20)

• Update socket stack to use Cstruct 0.6.0 API

v0.5.0 (2012-12-20)

• Update Cstruct API to 0.6.0
• [tcp] write now blocks if the write buffer and write window are full

v0.4.1 (2012-12-14)

• Add iperf self-test that creates two VIFs and transmits across them. This is a useful local test which stresses the bridge code using just one VM.
• Add support for attaching existing devices when initialising the network manager, via an optional attached parameter.
• Constrain TCP connect to be a unit Lwt.t instead of a polymorphic return value.
• Expose IPv4 netmask function.
• Reduce ARP verbosity to the console.
• Fix TCP fast recovery to wait until all in-flight packets are acked, rather then exiting early.

v0.4.0 (2012-12-11)

• Require OCaml-4.00.0 or higher, and add relevant build fixes to deal with module packing.

v0.3.1 (2012-12-10)

• Fix the DHCP client marshalling for IPv4 addresses.
• Expose the interface MAC address in the Manager signature.
• Tweak TCP ISN calculation to be more friendly on a 32-bit host.
• Add Manager.create ?devs to control the number of Netif devices constructed by default.
• Add Ethif.set/disable_promiscuous to permit directly tapping a network interface.

v0.3.0 (2012-09-04)

• Initial public release.